16.00 fl oz
SKU / UPC: 046500001413
Sweep or vacuum floor to remove loose dirt. 1. Squeeze out puddle (dinner plate size) of Brite 1 Step Floor Shine Cleaner. Spread over 3 x 3 foot area with damp mop. 2. Clean area throughly with a back and forth motion (loosening and picking up dirt). Rub with even strokes. 3. Transfer dirt into bucket by rinsing mop clean. Move on to the next area. Repeat steps 1-3 until finished. Floor will dry to a brilliant shine in just 10-15 minutes. Hints for brightest, cleanest, fastest drying results: If your floors look dull due to waxy build-up from other products, you can remove the build-up using the following method. Mix 1 cup of ammonia and 1/4 cup of Brite 1 Step Floor Shine Cleaner with 1/2 gallon of cool water. Spread over a 3 x 3 foot area. Let stand 5 minutes, scrub, and rinse with plain water. Repeat until build-up is removed and entire floor is clean. Not recommended for wood, unsealed ceramic, terrazzo, and cork floors.
S.C. Johnson & Son, Inc.
Racine, WI 53403-2236
Eye Irritant. Avoid eye contact. If eye contact occurs, rinse thoroughly with water for 20 minutes. If irritation persists, seek medical attention. Contains surfactants. Keep out of reach of children and pets. Do not mix with bleach-containing products as hazardous fumes may result. If this occurs, leave room immediately and get fresh air.